How PTO accrual works
Accrual means paid time off builds up as you work, instead of arriving all at once on the first day of the year. Employers usually state it one of two ways: a number of hours each pay period, or a fraction of an hour for every hour worked. The calculator converts an annual allowance into both, and works backward from a rate to the annual total.
Federal law does not require paid vacation, sick leave or holidays. Under the FLSA these benefits are a matter of agreement between employer and employee. Some states and cities do require paid sick leave with their own accrual rules, so check local law before you set a policy.
Per pay period = annual PTO hours ÷ pay periods (52, 26, 24 or 12)
Per hour worked = annual PTO hours ÷ hours worked per year
Reverse: annual = rate × pay periods, or rate × hours worked
A full-time year is 2,080 hours (40 × 52). For part-time staff, use their expected hours: an hourly accrual rate then scales with the hours they actually work.
Caps and carryover
A cap is the largest balance someone can hold; accrual pauses at the cap until they use some time. A carryover limit is how many unused hours roll into the next year. The calculator shows how many pay periods it takes to reach the cap and how many hours would sit above the carryover limit at year end, assuming a zero starting balance and no time used. Whether hours above the limit can be forfeited depends on state law, so check yours before adopting a use-it-or-lose-it rule.
Worked examples
Example 1: 15 days a year, biweekly payroll
15 days × 8 hours = 120 hours. On a biweekly payroll that is 120 ÷ 26 = 4.62 hours per paycheck. Per hour worked it is 120 ÷ 2,080 = 0.0577 hours, about 1 hour of PTO for every 17.33 hours worked.
Example 2: 1 hour for every 30 hours worked
Someone working 30 hours a week for 52 weeks works 1,560 hours a year. At 1 hour per 30 hours worked, they earn 1,560 ÷ 30 = 52 hours a year, or 6.5 eight-hour days. On a semimonthly payroll that averages 52 ÷ 24 = 2.17 hours per paycheck. With a 40-hour carryover limit, 12 hours would be over the limit if they used none.
Common mistakes
- Using the wrong number of pay periods. Biweekly payroll has 26 periods, not 24. Dividing 120 hours by 24 gives 5 hours a paycheck, which adds up to 130 hours a year instead of 120.
- Rounding the hourly rate too early. Rounding 0.0577 up to 0.06 adds about 4.8 hours a year at 2,080 hours.
- Leaving overtime out of the policy. Decide whether overtime hours earn PTO and write it down. The calculator counts every hour you enter.
- Giving part-time staff a full-time per-paycheck amount. A per-hour rate is fairer when hours vary.
Most HR and payroll tools track accrual for you. Compare options in our guides to HRIS software and HR software for small business, or see what PTO policies come with Gusto's plans. If your leave rules are too specific for an off-the-shelf tool, we build custom internal software.
Frequently asked questions
How do I calculate PTO accrual per pay period?
Divide annual PTO hours by the number of pay periods in a year. For example, 80 hours a year on a semimonthly payroll is 80 ÷ 24 = 3.33 hours per paycheck.
How much PTO is 0.0385 hours per hour worked?
At 2,080 hours a year, 0.0385 × 2,080 = 80.08 hours, or about 10 eight-hour days.
How many hours of PTO is 3 weeks?
With 40-hour weeks, 3 weeks of PTO is 120 hours. With 8-hour days, that is 15 days.
Is paid time off required by law?
Not under federal law: the FLSA does not require payment for time not worked, such as vacations, sick leave or holidays. Some states and cities require paid sick leave, so check local rules.
What is the difference between a PTO cap and a carryover limit?
A cap limits the balance at any time, so accrual stops when the balance reaches it. A carryover limit only controls how many unused hours move into the next year.


